Igwe na-emechi emechi na-akpaghị aka

Nkọwa dị mkpirikpi:

Ụdị: LYY4441

Onye nri ọnọdụ: Mgbasa oziỤdị

Akụkụ (L*W*H) (mm): 700*580*650mm

Arọ(kg):45KG

Oke ọrụ (X*Y*Z) (mm): 380*365*65mm

Axis:4Axis (X, Y1, Y2, Z)


Nkọwa ngwaahịa

Mkpado ngwaahịa

Vidiyo

Uru

Screw fastening Robot na-eme ka arụmọrụ ọrụ dịkwuo mma yana nkwụsi ike nke ịghasa ahụ na ntụkwasị obi.Na elu Teaching Pendant, rụọ nwere ike melite site onwe ha niile usoro parameters dị ka ịghasa nhazi na ịghasa ụdị, wdg Ọ nwere ike imeghari ka ụdị nile nke siri ike ịghasa fastening usoro na nweta zuru akpaaka.

Emebere igwe a ka ọ na-eme ka skru na-akpachi anya, a na-ejikwa ya maka imepụta skru na-echekwa ike.Enwere ike iji igwe ahụ maka ịgbatị akpaaka nke ụdị skru dị iche iche nwere nkọwa dị iche iche.Igwe ahụ na-anabata teknụzụ njikwa dị elu, yana usoro ịgbatị ihe nkedo bụ nke ziri ezi, ntụkwasị obi ma kwụsie ike.Igwe ahụ na-eji moto servo na-ebugharị nri nke skru, skru tightening na screw rotation, nke na-azọpụta ike na ịrụ ọrụ nke ọma.Igwe ahụ dabara adaba maka ọrụ ntuziaka na akpaaka.

Atụmatụ

1.Adịgide magnetik suction (vacuum suction), iji nweta ngwa ngwa nri na screwing.

2.Onye na-arụ ọrụ nwere ike iji ntinye akwụkwọ ntuziaka mee mmemme.Ọ na-arụ ọrụ nke ọma ma dịkwa mfe ịmụta ọrụ ahụ.

3.With mkpu ọrụ maka fastening efu, untightened kposara, eyi eri, wdg.

4.Support auto sensing mmalite ọrụ ọrụ.

5.With okpokoro ọrụ a kapịrị ọnụ, enwere ike gbanwee ọnọdụ ọrụ na-agbanwe agbanwe.

Ọrụ

1. Wide universality, obere na size, nwere ike na-arụkọ ọrụ na mmepụta akara, adaba maka ngwaahịa nnọchi.

2. Site na ọrụ nyocha nke ọgụgụ isi, ekpochi ekpochi nyocha, ekpochi na-akwụghị ụgwọ, ịghasa rụrụ arụ na ihe ndị ọzọ.

3. Enwere ike ịme axis Y ka ọ bụrụ ọdụ abụọ (ya bụ, okpukpu abụọ Y axis), ya mere onye ọrụ nwere ike ibu ọzọ.

4. Ogo dị elu nke akpaaka, ọrụ dị mfe nke ndị ọrụ nwere ike ịmụta na debug ngwa ngwa.

5. A na-ekwe nkwa nhụsianya ziri ezi, mgbanwe dị mma, na mma nke mkpọchi.

6. Touch ihuenyo ngosi ma ọ bụ kụziere pendant programmable nweta ọzọ arụmọrụ,Site a mfe mmemme, nwere ike tinye n'ime mmepụta, adaba maka mmepụta na management.

Ngwa

Ọ dabara maka ụdị ọ bụla nke ịghasa fastening usoro na ekwentị mkpanaaka, keyboard, Monitors, ụgbọ ala ngwa, ihe egwuregwu ụmụaka, obere ụlọ eletriki ngwa, integrated sekit, e biri ebi sekit mbadamba, LCD ihuenyo, electronic components (dị ka relays, ọkà okwu), wdg.

Oke

Nlereanya LYY4441
Ụdị nri Ụdị mgbasa ozi
Akụkụ (L*W*H) (mm) 700*580*650mm
Arọ(kg) 45KG
Oke ọrụ (X*Y*Z) (mm) 380*365*65mm
Axis 4 Axis (X, Y1, Y2, Z)
Ụdị ịkwọ ụgbọala Precision Stepping Motor+Timing belt
Ọsọ kacha X, Y 600mm/S, Z 500mm/S
Ugboro ugboro nkenke X, Y, Z ±0.02mm
Ụzọ nkuzi Nkuzi dịpụrụ adịpụ/ Ntinye data akwụkwọ ntuziaka/Nhọrọ: Ihuenyo mmetụ LCD
Usoro moto nkenke stepper moto
Ụdị nnyefe Akara oge + mkpọda mkpanaka + ụgbọ okporo ígwè
Ogwe njikwa pendant nkuzi (nhọrọ: PC ma ọ bụ ihuenyo mmetụ)
Screwdriver ika Taiwan DG / Japan HIOS
Oke Torque 0.5 ~ 15kgf.cm (nwere ike gbanwee)
Mee ka arụmọrụ sie ike Ihe dị ka 60pcs / min (dị ka ịghasa ụdị)
Voltaji AC 110V/220V,50Hz/60Hz
Interface Mpụga USB + RS232
Isi Iyi Ike Eletrik + Pneumatic
Achọrọ nrụgide ikuku 0.4 ruo 0.6MPa (4 ruo 6kg / cm2) dị ka ikuku akọrọ
Okpomọkụ na-arụ ọrụ 5-40C
Iru mmiri na-arụ ọrụ 20-90% RH

Nkọwa ngwaahịa

cavasv (2)
cavasv (1)
cavasv (3)

  • Nke gara aga:
  • Osote: